OSMOSE REMINERAL+
Why remineralise osmosis water?
Osmosis water is extremelypureandfreeof contaminants, makingitanideal starting water forallaquaria. However, it containsnovital mineralsandlacks thehardness whichisnecessarytobuffer thepH value. Prior to use in an aquarium, it is thus crucial to remineralise osmosis water and adjust it to an appropriatehardness for theanimals intheaquarium. DENNERLE Osmosis ReMineral+ isacarefullybalanced multimineral product which has been developed especially for osmosis water. ReMineral+ can be used to produce a quality of water corresponding to that of the native waters of tropical aquarium fish, shrimps and plants. It is ideal for all freshwater aquaria.
ReMineral+: Ideal mineral supply - stable pH
ReMineral+ enriches osmosis water with all the important minerals which are required in an aquarium. It also increases total and carbonate hardness and stabilises the pH value. Fish, shrimps and plants are additionally supplied with valuable trace elements such as boron, fluorine, iodine, lithium and others besides. Vital vitamins provide for increased vitality. Select organic substances activate the filter bacteria. DENNERLE Osmosis ReMineral+ is also ideal for hardening and mineralising rain water, spring water, soft tap water and all other soft waters.
Dosage and mode of us
Number of measuring spoons
(10 g each) to 100 litres |
Total hardness
°d |
Carbonate hardness
°d |
Conductivity
µS/cm |
| 1 |
2 |
1,3 |
140 |
| 2 |
4 |
2,6 |
180 |
| 3 |
6 |
3,9 |
420 |
| 4 |
8 |
5,2 |
560 |
Note: The actually attained values may differ from the stated values, depending on the quality of the starting water.
The contents of one pack are sufficient to attain the stated values for 5000 litres of water (total hardness) / 3250 litres of water (carbonate hardness).
Always add the required quantity of ReMineral+ to the total quantity of water whose hardness needs to be increased and stir well. Example: To increase the total hardness by 4 °d, dissolve 2 measuring spoons in 100 l of osmosis water. Do not premix ReMineral+ in only a few litres of water, so as to prevent any unnecessary sediment from forming. The mineral salt will dissolve within a few minutes. A higher level of CO2 content improves solubility. Mixing is best carried out in a separate container. The remineralised water can be used for the aquarium as soon as the ReMineral+ has dissolved.
Depending on the quality of starting water and the amount of ReMineral+ added, a slight sediment may form during mixing. This should be discarded and should not be used in the aquarium.
Special information
- ReMineral+ absorbs moisture from the air - always firmly reclose tin IMMEDIATELY after removing the quantity you require.
ReMineral+ which has become lumpy as a result of moisture can still be used. A larger amount of sediment will form during mixing, however. Do not use this sediment in the aquarium.
Ionic composition of ReMineral+
Cations:
- Calcium 45,5 %
- Magnesium 9,5 %
- Sodium 33,5 %
- Potassium 11,5 %
Anions:
- Hydrogen carbonate 45,5 %
- Sulphate 32,0 %
- Chloride 22,5 %
| Art. no. |
Contents |
Reach (HL) |
| 7035 |
250 g |
for 5.000 HL (GH) and 3.250 HL (KH) |
|
